User's Manual

4.4 Channel Selection
Press the
CH/+ button to
switch
the
display
between
remote sensors 1
through
8, and
scroll mode
.
In
scroll
mode,
all
of
detected
outdoor
sensors
will be
displayed in
five second intervals.
4.5 Sensor Search Mode
If any
of the sensor
communication
is
lost,
dashes
(--.-)
will be displayed on the screen. T
o reacquire the signal:
1.
If
a
specific
channel is
lost,
press the
CH/+
button
to display this
channel,
then
Press
and
hold
the
CH/+ button
for 3
seconds, and
the
remote
search
icon
will
be constantly displayed for up
to
3
minutes. Once
the
signal is
reacquired, the remote
search
icon
will
turn of
f,
and
the current values
will be displayed.
2. If new sensors are added, subtracted, or multiple
sensor channels are lost, press and hold the CH/+
button for
5 seconds (on any channel), and the
remote search icon will be constantly displayed
for up to 10 minutes. Once the signal is reacquired,
the remote search icon will turn off, and the
current values will be displayed.
4.6 Best Practices for W
ireless Communication
Wireless
communication is susceptible
to
interference,
distance,
walls
and metal
barriers.
W
e
recommend
the
Version 1.0 ©Copyright 2013, Ambient LLC. All Rights Reserved. Page 12