User's Manual

Problem
Solution
Move the display console around electrical
noise generating devices, such as
computers, TVs and other wireless
transmitters or receivers.
Move the remote sensor to a higher
location. Move the remote sensor to a
closer location.
Indoor and
Outdoor
Temperature
do not agree .
Allow up to one hour for the sensors to
stabilize due to signal filtering. The indoor
and outdoor temperature sensors should
agree within 2 °F (the sensor accuracy is ±
1 °F).
Use the calibration feature to match the
indoor and outdoor temperature to a
known source.
Display console
contrast is
weak.
Replace console batteries with a fresh set
of batteries.
.
Tem pe r at ur e
sensor reads
too high in the
day time.
Make sure the thermometer is mounted in
a shaded area on the north facing wall.
Consider the following radiation shield if
this is not possible:
http://www.ambientweather.com/amwesrpa
tean.html
Version 1.0 ©Copyright 2013, Ambient LLC. All Rights Reserved. Page 19