Manualshelf

User manual

ManualsBrandsAmbient ManualsHousehold Appliances3-Day Forecaster
11121314151617181920
Version 1.1 ©Copyright 2010, Ambient LLC. All Rights Reserved. Page 13
flashing and the + button and – button will be flashing (in the tendency section of the
display).
2. Indoor Temperature Units. Touch the + button or – button to alternate the display unit
between ℃ and ℉ (press the indoor temperature again if you wish to skip this setting).
3. Indoor Temperature High Alarm. Touch the INDOOR TEMPERATURE section again to
set the indoor temperature high alarm function. The +, ON/OFF and – button will be
flashing, and HI AL (high alarm) icon will light up.
Touch the + button or – button to change the value, or hold the + button or – button for 3
seconds to rapidly change the setting.
Touch the ON/OFF button to select the alarm on or off (if the alarm is enabled, the
speaker icon will be turned on, indicating the alarm function has been enabled).
4. Indoor Temperature Low Alarm. Touch the INDOOR TEMPERATURE section again to
set the indoor temperature low alarm function. The +, ON/OFF and – button will be
flashing, and LO AL (high alarm) icon will light up.
Touch the + button or – button to change the value, or hold the + button or – button for 3
seconds to rapidly change the setting.
Touch the ON/OFF button to select the alarm on or off (if the alarm is enabled, the
speaker icon will be turned on, indicating the alarm function has been enabled).
5. Indoor Temperature Record High. Touch the INDOOR TEMPERATURE section again
to display maximum indoor temperature record since the last reset. The maximum record
will be flashing, and the MAX icon will light up. To reset, press the maximum temperature
value for 3 seconds, and the maximum value will be reset to current reading.
6. Indoor Temperature Record Low. Touch the INDOOR TEMPERATURE section again to
display minimum indoor temperature record since the last reset. The minimum record will
be flashing, and the MIN icon will light up. To reset, press the minimum temperature value
for 3 seconds, and the minimum value will be reset to current reading.
5.2 Outdoor Temperature, Wind Chill and Dew Point
Figure 10