User manual

Figure 11

1. Touch the indoor humidity once, as shown in Figure 11. The indoor humidity will begin

flashing and the + button and – button will be flashing (in the tendency section of the

display).

2. Indoor Humidity High Alarm. Touch the INDOOR HUMIDITY section again to set the

indoor humidity high alarm function. The +, ON/OFF and – button will be flashing, and

HI AL (high alarm) icon will light up.

Touch the + button or – button to change the value, or hold the + button or – button for 3

seconds to rapidly change the setting.

Touch the ON/OFF button to select the alarm on or off (if the alarm is enabled, the

speaker icon will be turned on, indicating the alarm function has been enabled).

3. Indoor Humidity Low Alarm. Touch the INDOOR HUMIDITY section again to set the

indoor humidity low alarm function. The +, ON/OFF and – button will be flashing, and

LO AL (high alarm) icon will light up.

Touch the + button or – button to change the value, or hold the + button or – button for 3

seconds to rapidly change the setting.

Touch the ON/OFF button to select the alarm on or off (if the alarm is enabled, the

speaker icon will be turned on, indicating the alarm function has been enabled).

4. Indoor Humidity Record High. Touch the INDOOR HUMIDITY section again to display

maximum indoor humidity record since the last reset. The maximum record will be flashing,

and the MAX icon will light up. To reset, press the maximum temperature value for 3

seconds, and the maximum value will be reset to current reading.

5. Indoor Humidity Record Low. Touch the INDOOR HUMIDITY section again to display

minimum indoor humidity record since the last reset. The minimum record will be flashing,

and the MIN icon will light up. To reset, press the minimum temperature value for 3

seconds, and the minimum value will be reset to current reading.

5.4 Outdoor Humidity

Please reference Section 5.3. The outdoor procedure is similar to the indoor humidity procedure.