User manual

8. Pressure Record Low. Touch the PRESSURE section again to display minimum

pressure record since the last reset. The minimum record will be flashing, and the MIN

icon will light up. To reset, press the pressure value for 3 seconds, and the minimum value

will be reset to current reading.

Note: when absolute pressure is selected, step 4 will be skipped.

5.9 Pressure Graph

Note: The weather station bar graph flashes from left to right to prevent screen burn in. This

feature cannot be turned off.

Touch the PRESSURE GRAPH once, as shown in Figure 15. The barometric pressure will begin

flashing and the + button and – button will be flashing (in the tendency section of the display).

Press the + button or – button to change the pressure history time axis between 12 hours and 24

hours.

5.10 Time

Figure 16

1. Display Contrast Level. Touch the TIME once, as shown in Figure 16. The display contrast

value will begin flashing (example, lcd0 thru lcd8), and the + button and – button will be

flashing (in the tendency section of the display).

Press the + button or – button to adjust the contrast level from 0 to 8. (the default is 5).

2. Time Zone. Touch the TIME button again to display the time zone. The time zone value will

begin flashing and the + button and – button will be flashing (in the tendency section of the

display).

Press the + button or – button to adjust the time zone from -12 to 12, based on the

number of hours from Coordinated Universal Time, or Greenwich Mean Time (GMT).

The following table provides times zones throughout the world. Locations in the eastern

hemisphere are positive, and locations in the western hemisphere are negative.

Hours from

GMT

Time Zone

Cities

-12

IDLW: International Date Line West

---

-11

NT: Nome

Nome, AK

-10

AHST: Alaska-Hawaii Standard

CAT: Central Alaska

HST: Hawaii Standard

Honolulu, HI

-9

YST: Yukon Standard

Yukon Territory