User manual

Version 1.1 ©Copyright 2010, Ambient LLC. All Rights Reserved. Page 22
tendency section of the display).
Press the + button or – button to adjust the alternate the display between the alarm time,
and date and week date.
2. Date Format. Touch the DATE button again to display the date format (Md for month/day or
Dm for Day/Month). The date value will begin flashing and the + button and – button will be
flashing (in the tendency section of the display).
Press the + button or – button to adjust the alternate the display between the DD-MM
format and MM-DD format for the date.
3. Change Year. Touch the DATE section again to set the year. Touch the + button or –
button to change the year setting. The year will begin flashing.
Press the + button or – button to change the value, or hold the + button or – button for 3
seconds to rapidly change the setting.
4. Change Month. Touch the DATE section again to set the month. Touch the + button or
– button to change the year setting. The month will begin flashing.
Press the + button or – button to change the value, or hold the + button or – button for 3
seconds to rapidly change the setting.
5. Change Day. Touch the DATE section again to set the day. Touch the + button or –
button to change the year setting. The day will begin flashing.
Press the + button or – button to change the value, or hold the + button or – button for 3
seconds to rapidly change the setting.
6. Change Alarm Hour. Touch the DATE section again to set the alarm hour. Touch the
+ button or – button to change the alarm hour setting. The alarm hour will begin flashing.
Press the + button or – button to change the value, or hold the + button or – button for 3
seconds to rapidly change the setting.
7. Change Alarm Minute. Touch the DATE section again to set the alarm minute. Touch
the + button or – button to change the alarm minute setting. The alarm hour will begin
flashing.
Press the + button or – button to change the value, or hold the + button or – button for 3
seconds to rapidly change the setting.
Touch the ON/OFF button to select the alarm on or off (if the alarm is enabled, the
speaker icon will be turned on, indicating the alarm function has been enabled).
5.12 Memory
For a comprehensive weather history, the console stores up to 4080 complete sets of weather data with time
and date stamp. The base station will lose all of the weather data if there a power interruption. In the
event the memory is full, the old data is overwritten by the new data.
1. Review Historical Archived Data. Touch the MEMORY section once (next to the date