User manual

Figure 6

Connect the wind speed cable to the wind direction phone jack, as shown in Figure 7. Connect the

wind direction cable to the thermo-hygrometer phone jack (reference the label on the

thermo-hygrometer). Connect the rain gauge cable to the thermo-hygrometer phone jack (reference the

label on the thermo-hygrometer).

Insert two AA batteries in the thermo-hygrometer. The transmitter LED will light up momentarily (4

seconds), and then flash once every 48 seconds for each transmission update.

Note: We recommend installing Lithium AA batteries:

http://www.ambientweather.com/enaaliba4pa.html

Lithium batteries provide longer life and operate in colder temperatures.

Install the solar shield over the thermo-hygrometer/transmitter, and use the enclosed zip ties to clean

up the cables.