User guide

1.1 Controls

All changes of the settings take effect only after reboot of the unit.

Exception: TC-lockout / userbit insert with dip switch 1

Yellow Switch: Main On/Off

Rotary encoder switches with 16 positions behind the battery lid:

Switch 1: Type of sync signal:

This switch determines what type of signal is present on the BNC connector next

to the edge of the unit.

Pos. A turns off the video signal / audio generator if used as time code genearator

only to save battery life.

Pos. E allows to set the unit by USB, ignoring switch settings.

Pos. F is for firmware upgrade via USB.

Switch 2: picture rate of genlock signal or sample rate of word clock / black audio,

depending on setting of SW 1:

The right video format or sample rate are selected here.

Switch 3: time code frame rate:

Select the required frame rate. Please mind that invalid settings, like a integer fps

rate with a pull down picture rate will not work together.

Switch 1: Sync Signal

Type

Switch 2: Sync Signal Frame / Sample Rate

Switch 3: Time

Code frame rate

Pos.

Mode Video Word Clock / Audio

FPS

0 Video SD 23.98 (HD) 32000 23.98

1 Video HD 720P 24 (HD) 44100 24

2 Video HD 1080I/PsF 25 (SD & HD) 48000 25

3 Video HD 1080P 29.97 (SD & HD) 88200 29.97

4 Word Clock 1000/1001 30 (SD & HD) 96000 30

5 Word Clock 50 (HD 720P only)

176400 29.97 drop

6 Word Clock 1001/1000 59.94 (HD 720P only)

192000 30 drop

7 Black Audio 1000/1001 60 (HD 720P only)

8 Black Audio AES-3

9 Black Audio 1001/1000

A Audio/Video off

E USB

F Recovery