User Guide

Appearance
Status
AmbirScan ADF is launched, the scanner is connected and ready to scan
images.
The scanner is not connected to the computer, or scanner
power is off, or the scanner is in standby mode (press any
button on the scanner or load a document in the feeder to
exit standby mode.
No Display
AmbirScan ADF is not running. The scanner may or may not
be connected to the computer. Start AmbirScan ADF by
clicking on Start >All Programs >Ambir ImageScan Pro>
AmbirScan ADF
Status LED
The front panel LED indicates the scanner status.
Light
Status
Blue
The scanner is turned on, ready to scan images.
Orange
The scanner is in standby mode (sleep mode). Default timeout
is 10 minutes. The timeout can be changed or disabled by
clicking Start> All Programs> ImageScan Pro> Scanner Utility
Off
The scanner is off, either because the power is not turned on, or
because the AC adapter is not properly plugged into an AC
power outlet.
11
The front panel LED indicates the scanner status.
Appearance Status
AmbirScan ADF is launched, the scanner is connected
and ready to scan images.