User's Manual

Q206 User Manual
13
contact your service provider. Only when two or more calls are on can Swap and
Conference show.
3.8 Insert international access code
When you are dialing an international call, keep press * key till the international call prefix
“+” shows and then enter the number in the following order:
+ Country code complete number send key
3.9 Dial a extension or voicemail number
You need to enter P (pause) or W (wait) when dialing an extension number, keep press *
key to switch between ‘P’ and ‘W’. You can enter numbers as following:
District code exchange phone number P or W extension number send key
3.10 Emergency calls
You can make emergency calls as long as your current location is network-covered which
you can know by checking the signal strength bar showing on the top left corner of the
screen.
Note: Emergency numbers vary by country. The emergency number(s) in your phone
may not work in all locations, and sometimes an emergency call cannot be placed due to
network, environmental, or interference issues.