User's Manual

12
Basic Operations
Make a call
Enter area code and phone number in standby mode, then press the calling key.
Dial “+” key directly and it shows + on the screen, then enter the country code, area code and phone
number when making an international call.
Press the calling key after you entered the number to start the call. It will display the corresponding name
on the screen if the numbers have been stored in the phone book. After that, you will hear the ringtone.
Adjust the volume
Press up navi key or down navi key to adjust the volume during your call. (For some models, you can
press up/down on the side also)
End a call
Press the call end Key to end a call. Press buttons on the headset to end a call when using a headset.
You can end a call by closing the cover of clamshell/flip phone. (You need to set from profiles)
Answer a call
The phone will remind the user with ring, vibration and other ways when you have incoming calls. The
background light will be lighted. Incoming call information will also be shown on the screen.
¾ Press Calling key to answer the call.
¾ Press call end key to reject the call.
Note: You can also press buttons of the headset to answer or hang up a call when using a headset.
Records of outgoing calls
¾ In standby mode, you can press the Calling Key to view the latest calling records.
¾ You can dial the phone numbers appears in the list directly with Calling Key. Press OK Key to
view the details of those numbers. Press options to save or delete a number.
Optional during a call
You can use a lot of control functions during a call. The calling options are available only during a call, at
the same time; call waiting, call holding and other features must be supported by network. Please contact
your network operator.
Call waiting
If the network supports “Call Waiting” and you have activated it, you will hear call waiting tone if you have
another call when the line is busy.
¾ Press calling key to answer the call, the first call will be automatically maintained. After connecting,
please check the reference "Keep/switch."
¾ Press call end Key to reject the call, and continue the current call.
¾ Press Options, select End, so that you can hang up the current call and answer the incoming call.
Switch
Switch between Current call and Maintained call.
Call Hold