User's Manual

36
DeleteDelete the selected bookmark
Delete allDelete all bookmarks
Add bookmarkEdit the new name and address of bookmark
Recent pagesView the page history directly
Input addressEdit the address then you can connect the address directly
Service inboxView service information
Settings:
ProfilesSet homepagegatewayportnetwork account
Browser optionsSet the waiting time and display pictures
Service message settingsSet whether you accept message service
Clear cacheUse for clear cache
Clear cookiesUse for clear cookies
Trusted certificates
Date account
Edit the GSM date and GPRS information.
Call settings
¾ Call waiting
This network service allows you to answer an incoming call while you have a call in progress. This service
shall be supported by operator.
Submenu:
Activate: Enable this service (Apply to operator first)
Deactivate: Disable this service (Apply to operator first)
Query status: Consult the service supplier to check the service state.
¾ Call divert
Call transferring function can transfer some preset phone numbers to another phone.
Divert All voice calls: all incoming calls are transferred directly.
Divert if unreachable: transfer incoming calls when out of service.
Divert if No answer: transfer incoming calls when no answering in certain time.
Divert if Busy: transfer incoming calls when busy.
Divert all Data calls: Transfer all data calls shall be supported by network operator.
Cancel all diverts: cancel this service.
¾ Call barring
You can barring the call:
Outgoing calls
Incoming calls
Cancel all cancel the barring call
Change barring password
¾ Advance settings
Blacklist
Mode: enable/disable blacklist.
Blacklist number: the contacts in the blacklist cannot get through when they call you. And you
don’t have any record on your phone. Use it with caution.
Auto redial on/off .This function enables your phone redial automatically until get connected.
Call time reminder on/off .Remind the time you are calling. Disable, once and recurrent alarm
are optional. There is no alarm when it’s disabled. You need to set the time (1-3000)s for ringing