User manual

Digital Monitor AMC-1DBx Series User Manual
95
• Display Logging re-enabled after remote AMC Manager activity
• Console Logging re-enabled after remote AMC Manager activity
• AMC Manager in use.
These messages are displayed when AMC Manager activity causes the Display and/or Console logging
to be suspended or re-enabled. Due to improved transfer times of the AMC Manager Printer Port these
interfaces are suspended.
The following are exceptional messages that are not normally logged they indicate a problem in the system
and should be addressed:
Low Voltage detected on Battery(Database/RTC) at Startup
Low Voltage detected on Battery(Database/RTC)
Could not create MONITOR_TASK
Could not create UPGRADE_FW_TASK
Could not create DB_SAVE_TASK
Could not create DEBUG_PRINT_TASK
Could not create SENSOR_LOG_TASK
Could not create RELAY_LOG_TASK
Could not create ALARM_LOG_TASK
Could not create SYSTEM_LOG_TASK
Could not create ADMIN_LOG_TASK
Could not create SECURITY_LOG_TASK
Could not create COMM_LOG_TASK
Could not create PRT_LOG_TASK
Could not create TELNET_TASK
Could not create NETSETUP_TASK
Could not create LCD_DISPLAY_TASK
Could not create LCD_TIME_TASK
Could not create DB_RESTORE_USB_TASK
Could not create DB_RESTORE_USB_TASK
Could not create MONITOR_TASK
Could not create UPGRADE_FW_TASK
Could not create LOCAL_RELAY_ANALOG_OUT_TASK
Could not create MODBUS1_TASK
Could not create MODBUS2_TASK
Could not create MODBUS3_TASK
Could not create MODBUS4_TASK
Could not create SLV_MODBUS_TASK
Could not create MODBUS_RX_LED_TASK
Could not create MODBUS_TX_LED_TASK
Could not create MODBUS_UPDATE_TASK
Could not create MONITOR_SWITCH_TASK
Could not create MONITOR_SCOM_TASK
Could not create DEVICE_UNIQUENESS_TASK
Could not create BACSERVER_TASK
Could not create FORMAT_USB_TASK
Could not create DB_SAVE_USB_TASK
Could not create ZONE_SCHEDULING_TASK
Could not create Telnet_server
Could not create SHELL_TASK
Could not create USB_MFS_TASK
Error Installing <NV Device Name>