User manual

Digital Monitor AMC-1DBx Series User Manual
97
Can't save Database; BAD SRAM March Field of Ones
Can't save Database; BAD SRAM March Field of Zeros
Data Base ID Mis-match
Can't _timer_create_component
Can't create save_monitor_db_timer event
Can't create update_modbus_timer event
Can't create Monitor_reenable_console_display_logs_event_ptr
Can't create Monitor_lite_lcd_event_ptr
Can't open save_monitor_db_timer event
Can't open update_modbus_timer event
Can't open Monitor_reenable_console_display_logs_event_ptr
Can't open Monitor_lite_lcd_event_ptr
_timer_start_oneshot_after() failed for Save_Monitor_Database
_timer_start_oneshot_after() failed for Modbus_update
_timer_start_oneshot_after() failed for Monitor_reenable_console_display_logs
_timer_start_oneshot_after() failed for Monitor_lite_lcd
Writing to dtim<DMA Timer #> interrupt failed
dtim<DMA Timer #>: Couldn’t flip MB<Channel #> TO_WRITE
dtim<DMA Timer #>: Couldn’t flip MB<Channel #> TO_READ
Couldn't set I2C DAC Bus address
I2C DAC not available
Bad parameters for Do_MAS_Modbus_sensors
Bad parameters for Do_MAS_Modbus_relays");
Bad parameters for Do_MAS_Modbus_analog_outs");
UE_ISR In ISR: <0 or 1> ,PC: 0x<Address> and SR: 0x<Status Register>
UE_ISR TIME <Year,Month,Day Hour:Minute:Second> Day:<0 to 7>
UE_ISR Vector #: <Vector Number>
UE_ISR Task Id: 0x<Task Number> and Stack Frame: 0x<Stack Pointer>
WD_ISR In ISR: <0 or 1> ,PC: 0x<Address> and SR: 0x<Status Register>
WD_ISR TIME <Year,Month,Day Hour:Minute:Second> Day:<0 to 7>
WD_ISR Vector #: <Vector Number>
WD_ISR Task Id: 0x<Task Number> and Stack Frame: 0x<Stack Pointer>
APPENDIX A.1 SENSOR.LOG Items
The sensor log file messages can appear in the USB Storage device when the menu item Log File>Sensor is
enabled.
The RS-485 messages will appear when the RS-485 system has been reconfigured due to changes to the
sensor configuration. The will list all sensors configured on the Modbus channels 1-4 whether enabled or
disabled for the system. Local device will not appear is this list. The RS-485 number can range from 1:4
while the Sensor number is from 1-988. It contains the following format:
RS485:<Channel #> Sensor:<Sensor #> <Enabled or Disabled>