User manual

Digital Monitor AMC-1DBx Series User Manual
102
TELNET_Server created
TELNET_TASK created
DB_RESTORE_USB_TASK created
MONITOR_TASK created
MONITOR_SWITCH_TASK created
BACSERVER_TASK created
DEVICE_UNIQUENESS_TASK created
LOCAL_RELAY_ANALOG_OUT_TASK created
ZONE_SCHEDULING_TASK created.
DB_SAVE_TASK created
UPGRADE_FW_TASK created
NETSETUP_TASK created
MODBUS1_TASK created
MODBUS2_TASK created
MODBUS3_TASK created
MODBUS4_TASK created
SLV_MODBUS_TASK created
MODBUS_RX_LED_TASK created
MODBUS_TX_LED_TASK created
MODBUS_UPDATE_TASK created
MONITOR_SWITCH_TASK created
MONITOR_SCOM_TASK created
DB_SAVE_USB_TASK created
ZONE_SCHEDULING_TASK created
SHELL2_TASK created
USB_MFS_TASK created.
Additionally the following FLASH Upgrade messages can be displayed when 10Aquila.elf.csum and
10Aquila.elf.bin file are detected on USB storage upon start up (Some of the messages only occur during a
fault situation):
FLASH Upgrade: Ignoring Version detected in USB check file:10aquila.elf.csum
FLASH Upgrade: No USB EMAC file:EMAC.txt
FLASH Upgrade: Obtained MAC:<MAC> in FLASH
FLASH Upgrade: Proceeding with upgrade; Ignoring checksum in 10aquila.elf.csum
FLASH Upgrade: Need to Reboot to re-initialize NANDFLASH Driver and start new image
FLASH Upgrade: No USB check file:10aquila.elf.csum
FLASH Upgrade: No USB image file:10aquila.elf.rbin
FLASH Upgrade: Bad USB image file:10aquila.elf.rbin
FLASH Upgrade: No USB check file:10aquila.elf.csum
FLASH Upgrade: Bad USB check file:10aquila.elf.csum
FLASH Upgrade: Old Version detected in USB check file:10aquila.elf.csum
FLASH Upgrade: Upgrade skipped; Flash contents newer then USB check file:10aquila.elf.csum
FLASH Upgrade: No USB EMAC file:EMAC.txt
FLASH Upgrade: Bad USB EMAC file:EMAC.txt
FLASH Upgrade: Obtained SN:<Serial Number> in USB file:EMAC.txt
FLASH Upgrade: Obtained MAC:<MAC Number> in USB file:EMAC.txt
FLASH Upgrade: Checksum mismatch between USB image file:10aquila.elf.rbin:<CS> and FLASH
Device:<CS>
FLASH Upgrade: Proceeding with upgrade; Flash contents differ from USB image file:10aquila.elf.rbin
FLASH Upgrade: Checksum match between USB image file:10aquila.elf.rbin:<CS> and FLASH
Device:<CS>
FLASH Upgrade: No upgrade needed; EMAC.txt file same as FLASH MAC
FLASH Upgrade: No upgrade needed; Flash contents the same as USB image file:10aquila.elf.rbin FLASH
Upgrade: Flash contents the same as USB image file:10aquila.elf.rbin
FLASH Upgrade: Proceeding with upgrade; EMAC.txt file differs from FLASH MAC