User manual

Digital Monitor AMC-1DBx Series User Manual
103
Other possible SYSTEM Log messages:
Date and Time Changed from Menu
Date and Time Changed Remotely (AMC Manager)
Date and Time Changed from BAS
Error Installing CONSOLE_PORT
Shell2 exited...
APPENDIX A.5 ADMIN.LOG Items
The administration log file messages can appear in the USB Storage device when the menu item Log
File>Admin is enabled.
The Data Base Changed messages are logged when Data base is changed from various sources; AMC
Manager, Menu or BAS. Additionally the Data Base Changed can be forced due to; Init_db, Data Base
Recovery or Sensor Default. The Data base Changed has the following format:
Data base Changed <Source>
The Logging choice changes are track changes from the various sources. The logging items are 1 to 10
representing; Sensor, Relay, Alarm, System, Admin, Communication, Security, Telnet Console, LCD
Display and Printer Port. The Boolean change is 0 or 1 for disabled or enabled. The sources are
Remotely (AMC Manager), Menu or BAS. The Logging Choice message has the following format:
Logging Choice Item<1 to 10>=<Boolean 0 or 1> Changed <Source>
Data base change items are specifically tracked when initiated by AMC Manager. The following messages
are logged during AMC Manager downloads:
Data Base ID Changed Remotely (AMC Manager)
Configuration 1 Values Changed Remotely (AMC Manager)
Serial Mode Changed Remotely (AMC Manager)
Configuration 2 Values Changed Remotely (AMC Manager)
Other Gas Labels Changed Remotely (AMC Manager)
Engineering Units Changed Remotely (AMC Manager)
Zone Labels Changed Remotely (AMC Manager)
Sensor Values Changed Remotely (AMC Manager)
Relay Values Changed Remotely (AMC Manager)
Analog Output Values Changed Remotely (AMC Manager)
Zone Values Changed Remotely (AMC Manager)
Zone SensorID Values Changed Remotely (AMC Manager)
Interface Values Changed Remotely (AMC Manager)
MODBUS Ports 1-4 Values Changed Remotely (AMC Manager)
Additionally the Administration log tracks changes to the MODBUS, RS-485, BAS and PRINTER PORT
interfaces:
Modbus Changed due to Menu Action
RS485:<Channel> <Enabled or Disabled>
BAS MODBUS <Enabled or Disabled>
Serial Mode Changed to Printer from Menu
Additionally the Administration log tracks detail of the DIP Switch User Options when change is detected: