User manual

Digital Monitor AMC-1DBx Series User Manual
104
DIP Switch Language:English
DIP Switch Language:French
DIP Switch Audio:<Disabled or Enabled>
DIP Switch Sensor Delay:<Disabled or Enabled>
DIP Switch Zero Buffer:<Disabled or Enabled>
DIP Switch Minimum Run Time:<Disabled or Enabled>
DIP Switch Post Run Time:<Disabled or Enabled>
DIP Switch Calibration Mode:<Disabled or Enabled>.
APPENDIX A.6 SECURITY. LOG Items
The security log file messages can appear in the USB Storage device when the menu item Log File>Admin
is enabled. The Security log tracks password changes, system menu log in and log out and BAS MODBUS
write access. The following messages can appear in the security log file:
Password Accepted from Menu
Password Changed from Menu
Log In Attempted from Menu
Log Out Occurred from Menu
Logged Out Remotely (AMC Manager)
BAS MODBUS Lockcode Write Match Achieved from BAS
BAS MODBUS Lockcode Updated from Menu
APPENDIX A.7 COMM.LOG Items
The communication log file messages can appear in the USB Storage device when the menu item Log
File>Comm is enabled. The communication log monitors Ethernet and MODBUS conditions. The following is
The following running Ethernet and BACnet messages appear in the communication log file every minute:
IPAddr:<IP Address>
IP Subnet:<IP Subnet Mask>
IP Router:<Router Address>
BACnet ID:<BACnet ID>
Octet Received:<RX OCTETS>
RX Packets:<RX PACKETS> Uni:<RX UNICAST>
RX Multi:<RX MULTICAST> Broad:<RX BROADCAST>
Loss no resources:<RX MISSED>
Loss int. errors:<RX ERRORS>
Loss other reasons:<RX DISCARDED>
Octet Sent:<TX OCTETS>;
TX Packets:<TX PACKETS> Uni:<TX UNICAST>
TX Multi:<TX MULTICAST> Broad:<TX BROADCAST>
Unsent no resources:<TX MISSED>
Unsent int. errors:<TX ERRORS>
Bad Destinations:<TX DISCARDED>
The following Ethernet and BACnet exception messages appear in the communication log file when they
occur and indicate problem(s) in the system which should be addressed:
BAD IP:<IP Address> In Use
BAD BACnet ID <ID> In Use
BAD BACnet ID:<UDP Port>