User manual

Digital Monitor AMC-1DBx Series User Manual
12
4. ETHERNET 1 x Green LED to indicate Link Activity
1 x Green/Red LED to indicate Link Speed (10/100)
Collision
5. Display A QVGA LCD with backlight used to display menu system
operation.
6. DOWN Pushbutton Editing pushbuttons used to scroll through the current menus,
select parameters, and increment or decrement selected
parameter options or values.
7. BACK Pushbutton Editing pushbutton used to move to the previous highest
menu level, or exits setup mode from the top level of the
setup menu.
8. ENTER Pushbutton Editing pushbutton that selects a sub-menu or confirms a
menu (parameter) choice.
9. RESET RELAY
Pushbutton
When pressed, resets any latching relays, providing the alarm
condition has subsided.
10. TEST Pushbutton When pressed, causes continuous activation of all relay
outputs (energized or de-energized, depending on
configuration), activation of the system fail relay output (to the
de-energized state), and continuous activation of the audio
alarm (if enabled).
Sensor processing and updating of internal status and timers
continues. When released, all outputs return to normal
operation
11. HOLD Pushbutton While pressed during normal operation, this pushbutton
freezes the display on the currently displayed sensor until it is
released. Upon release, the display immediately advances to
the next sensor (depending on the display mode selected),
allowing the HOLD pushbutton to be used to quickly step
through multiple sensors