User manual

Digital Monitor AMC-1DBx Series User Manual
37
AMC
-1DB Gas Monitor 1.0
Display Log
Sensor3 Good, No Alarms
Remote MODBUS:1 Admin. Enabled
MODBUS Address:003 Instance:1
Type: Enhanced AMC411
Number of Alarms:2
Alarm1 Relay:9 Delay:0s
Alarm2 Relay:10 Delay:0s
Alarm3 Relay: Not Used
Fail Relay:4 Delay:0s
Sensor Model: N/A
Sensor S/N: N/A
Calibration Period Days: N/A
Days before Calibration: N/A
Days before End of Life: N/A
Sensor Supply Voltage: N/A
Sensor Temperature: N/A
--------------------------------
Sensor Status:√S#003
CO 0 PPM
The above display can be configured to cycle through sensor device information for each
sensor connected to the monitor when Option/Display Mode is set for Disp All Data.
Please refer to Get Sensor Status for complete details. Alternatively the display can be
configured for relay status. The following display is example of relay status:
AMC
-1DB Gas Monitor 1.0
Display Log
Relay:1 Status
Remote MODBUS:1 Admin. Enabled
MODBUS Address:001 Instance:1
Type AMC-1D8R
--------------------------------
Relay:√004 Alarms 000
De-Energized
The above display can be configured to cycle through relay device information for each
relay connected to the monitor when Option/Display Mode is set for Disp All Relay.
Please refer to Get Relay Status for complete details.