User manual

Digital Monitor AMC-1DBx Series User Manual
45
4. After a moment the bottom two lines will display:
USB-DB Saving…
Please Wait!
5. Upon success when Display (LCD) logs are enabled; the Display Log middle
area will indicate:
Database Saved from USB c:\amc-...
Database+ Saved from USB c:\amc...
The USB storage device will contain the AMC-1DB.ADF file with the name
AMC-1DB.ADF_SAVED{_YEAR_MON_DAY_HOUR_MINUTE}
The USB storage device will contain the AMC1DB_P.ADF file on the name
AMC1DB_P.ADF_SAVED{_YEAR_MON_DAY_HOUR_MINUTE}.
These files can now be used to restore the database from a USB storage device.
Additionally the AMC-1DB.ADF_SAVED… file can be transferred and opened by
the AMC Manager PC tool.
6. If unsuccessful when Display (LCD) logs are enabled; the Display Log middle
area will indicate:
Can’t Save DB to USB
No AMC-1DB.ADF_SAVED… or AMC1DB_P.ADF_SAVED… files will be
available on the USB storage device.
In order to restore the Database using USB storage device:
1. Rename and place the previous saved ADF file onto the USB storage device with
the filename “AMC-1DB.ADF” and the supplement file “AMC1DB_P.ADF.
Currently the supplementary file “AMC1DB_P.ADF” cannot be obtained
from AMC Manager and must be obtained through saving the database to
USB storage device described previously. Additionally future versions of
AMC-1DB.ADF obtained from AMC Manager may remove the need for using
the supplementary file.
2. Reboot system by power restart.
3. After self-test and during startup the monitor LCD Display will show a progress
bar just above the bottom two lines. If the ADF file is found the bottom two lines
will display:
USB-DB Restoring…
Please Wait!
4. Upon success when Display (LCD) logs are enabled; the Display Log middle
area will indicate: