User manual

Digital Monitor AMC-1DBx Series User Manual
46
Database Restore from USB c:\...
Database+ Restore from USB c:\..
Monitor database save complete
The AMC-1DB.ADF file on the USB storage device will be renamed to
AMC-1DB.ADF_RESTORED{_YEAR_MON_DAY_HOUR_MINUTE}
The AMC1DB_P.ADF file on the USB storage device will be renamed to
AMC1DB_P.ADF_RESTORED{_YEAR_MON_DAY_HOUR_MINUTE}.
5. If unsuccessful when Display (LCD) logs are enabled; the Display Log middle
area will indicate:
Can’t Restore DB from USB
Using previous DB
Possible a database mismatch ID message will appear if ADF file is incompatible
with existing monitor F/W:
Data Base ID Mis-match
When restore is unsuccessful the AMC-1DB.ADF and AMC1DB_P.ADF
filenames will remain unmodified on USB storage device.
6.12 MENU SYSTEM AND FEATURES
6.12.1 Menu Navigation
System setup, configuration and maintenance are performed using the LCD display and
the programming keypad located on the front panel of the Gas Monitor AMC-1DBx.
Four pushbuttons are provided, labeled BACK, UP, DOWN and ENTER.
• BACK Pushbutton
Moves to the previous highest menu level or exits setup mode from the top level
of the setup menu.
• UP, DOWN Pushbutton
Scrolls through the current menus, selects parameters, increments or
decrements selected parameter options or values.
• ENTER Pushbutton
Selects a submenu or confirms a menu (parameter) choice.
Note:
Access to the configuration functions is password protected. All systems
parameters, except selection of the default Display Mode, require a password-
protected log in before any parameters can be modified.