User manual

Digital Monitor AMC-1DBx Series User Manual
49
the following submenu items:
• Set IP Configuration
• Set BACnet Configuration
• Set MODBUS Configuration
• Set Analog Outputs
Select Relay Provides access to the menu items which configure the system
relays.
Select Sensor Provides access to the menu items which configure the system
sensors.
Select Zone Provides access to menu items for grouping sensors associated
with alarm/fail relays and analog output with a provision for a
scheduled relay event.
Change Password Allows changing of the system password, once logged in.
Get License Info Allows you to view the application license information.
Since the monitor’s programming functions are password protected, it is necessary to
access the login screen. See Menu Navigation.
6.12.6 Allowable Operations When Not Logged In
You can navigate menus without logging into the monitor. This feature is provided to
allow you to view configuration information. Without logging in, you can view new menu
items which provide status/statistics information about transmitters and relays.
From the Log In screen, and before entering a password to log in, use the DOWN
pushbutton to scroll to and access the following menus:
• Set Options
• Select Sensor
• Select Relay
• Get Sensor Status
• Get Relay Status
• Get RS-485 Status
• Get Ethernet Status
• Get License Info
• Exit Setup
6.12.7 GET SENSOR STATUS
The Get Sensor status display allows you to view operational status and statistics about
the sensor in question. It is available when system is running with Option/Menu Display
Mode set for Disp All Data or through the logged out menu; Get Sensor Status.
The bottom two-line display is employed to navigate to the sensor status window. The
two-line display indicates;
Line 1:
• menu item title
• sensor number
• a check mark (√) indicating the sensor ID is unique within the system
Line 2:
• target gas