User manual

Digital Monitor AMC-1DBx Series User Manual
55
6.12.10 GET ETHERNET STATUS
The Get Ethernet status menu allows you to view operational status and statistics about
the ethernet in question before having to log into the monitor.
To access the Get Ethernet Status menu
1. At the Log In screen, press the DOWN pushbutton.
The Set Options screen is displayed
2. Press the DOWN pushbutton.
The Select Sensor screen is displayed.
3. Press the DOWN pushbutton.
The Select Relay screen is displayed.
4. Press the DOWN pushbutton.
The Get Sensor Status screen is displayed.
5. Press the DOWN pushbutton.
The Get Relay Status screen is displayed.
6. Press the DOWN pushbutton.
The Get RS485 Status screen is displayed.
7. Press the DOWN pushbutton.
The Get Ethernet Status screen is displayed.
Get Ethernet Status
8. Press ENTER to navigate to the ethernet information. The bottom two lines of the
display will show the Ethernet MAC. The middle Ethernet Status area contains
other statistics and information including the IP Address, Subnet MASK, IP
Router address and BACnet UDP. The statistics include transmitted and received
octets and packets and counts for Unicast, multicast and broadcast. Additionally
received losses and unsent packets are counted. The middle Ethernet status
area is similar to the following: