User manual

Digital Monitor AMC-1DBx Series User Manual
66
To access the Select Zone menu
1. Log into the gas monitor.
2. At the Log In screen, press ENTER.
3. Enter the valid 4-character password.
4. Press ENTER.
The Select Sensor menu item is displayed.
5. Press the DOWN pushbutton.
The Select Relay menu item is displayed.
6. Press the DOWN pushbutton again.
The Select Zone menu item is displayed.
Table 6-3 describes the submenu items found in the Select Zone menu.
Table 6-3: Select Zone Submenu
SUBMENU DESCRIPTION DISPLAY
Select Zone Allows the selection of the zone of
interest to review or configure. (1-128)
Select Zone Number
1

Set Zone Admin
State
Shows the selection of the zone admin
state. (Enable/Disable)
Select Zone Z#001
Enable

Set Zone Label Shows the selection of the zone label
that identifies a geographic area. (Zone
labels have a max of 20 characters).
Set Zone Label Z#128
4E Parking Garage

Zone Time Menu Provides access to timed zone events
configuration options. (Zone schedule,
Timed action, Schedule Start/End)
Zone Time Menu Z#001
Zone Schedule

Zone Schedule Shows the selection of the zone
schedule state. (Never, Sunday’s,
Monday’s, Tuesday’s, Wednesday’s,
Thursday’s, Friday’s, Mon. to Fri., Mon.
to Sun.)
Zone Schedule Z#001
Disabled

Schedule Start Shows the selection of the time of day
that relays are asserted to the enable or
disable state.
Schedule Start Z#001
23:59

Schedule End Shows the selection of the time of day
that relays are released from the enable
or disable state.
Schedule End Z#001
00:01

Timed Action Shows the selection of the relays action.
(Enable/Disable)
Timed Action Z#001
Enable Relay