User manual

Digital Monitor AMC-1DBx Series User Manual
70
Alarm Hysteresis Shows the selection of the alarm
hysteresis. (0.0 %FS to 5.0 % FS)
Alarm Hysteresis
2.5 %FS

Enable Dew Point
Alarm
Shows the selection to enable the alarm
dew point. (Yes/No)
Enable Dew Point Alm
No

Serial Mode Shows the selection of the Serial Mode
choice. (Remote; Printer) Printer serial
mode will configure a port to dump
periodic system information. Remote
serial mode allows transfer of system
configuration to and from a remote AMC
Manager application.
Serial Mod 57600,7,E
REMOTE

Date and Time Shows the selection of the date and
time.
This selection contains fields for local
date and time and can be adjusted using
the UP and DOWN buttons. The ENTER
button will progress to the next field. The
time fields use a 24 hour h:m:s format.
Date & Time
2012 Mar 1 00:38:48

Log File Shows the selection of the log file
enables; Sensor; Relay; Alarm; System;
Admin; Security; Comm; Display; Printer;
Console; Eject USB; Format USB
(Enable/Disable).
Log File
Sensor

Backlight Shows the selection of the backlight
setting. (Always On; Power Save)
Backlight
Always On

Unit Node ID Allows the selection of the unit node ID
(1-9). Unit node ID is applicable when
Serial Mode is configured for Remote.
A remote AMC Manager application can
support up to 9 nodes.
Unit Node ID
1

Select User Label Shows the selection of the user label
(USER1 through USER9). User label
allows custom gas labels to be added to
the sensor configuration menu.
Select User label
USER1

Modify User Label Allows the modification of the user label.
(Labels USER1 through USER9 can be
changed to a 7 character custom label)
Modify User label #1
USER1

Select Unit Label Allows the selection of the unit label.
Engineering Unit Label allows custom
Select Unit Label #1
ENG1