User manual

User manual-amc i-M15a_G
Page 6 of 12
PN: 21-i-M15a_IM
REAR PANEL
1. Heat Sink
The heat sink is water sealed and
inside the heat ventilation holes on
plastic rear cover. So, it will be very
effectively venting the heat out from
inside of the monitor and with
complete water sealing feature.
2. Battery Cover
The battery of the Monitor is water
sealed securely fixed inside the
Battery Cover.
3. Water Sealed DC Power
Receptacle
This is a special designed water
sealed DC Power Receptacle for
connecting 15VDC/4A power from
Monitor Power Adaptor to the i-M15a
Monitor for charging the battery of i-
M15a.
Please pay careful attenuation to the
plug connector. There is an
indentation on the receptacle
matching the key on the power cord
plug to ensure the alignments
between receptacle and power cord
plug are correct.
Tighten the screw on power cord
plug until snug. Do not overtighten or
use pliers !
FRONT & TOP PANELS
1. POWER Button (Battery Power
Button)
This is a Battery Power Button. It is a
toggle switch and will only work
when power adaptor is not plugged
into i-M15a.
When power adaptor is not plugged
into i-M15a, you can press the
POWER button for 5 seconds to turn
the battery power off.
Power Savings feature : When power
adaptor is not plugged into i-M15a
and i-M15a is on standby (OFF)
Water sealed DC Power Receptacle
Power Cord Plug