SERVICE SAFETY PRECAUTIONS (UL) WARNING! INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VORSICHT! UNSICHTBARE LASERSTRAHLEN TRITT AUS, WENN DECKEL GE FFNET UND WENN SICHERHEITSVERRIEGELUNG BERBR CKT IST. NICHT DEM STRAHL AUSSETZEN. ADVARSEL- USYNLIG LASERSTR LING VED BNING, N R SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDG UDS TTELSE FOR STR LUNG. ADVARSEL- USYNLIG LASERSTR LING N R DEKSEL BRYTES. UNNG EKSPONERING FOR STR LEN.
FEATURES OF THE AMCTM MODEL CD8b * The AMC model CD8b was designed to meet professional quality performance standards and to provide superior value. * Select grade components are utilized throughout the circuit design with special emphasis on components within the audio path to assure stable, consistent performance. * Premium transport and servo drive system assures constant data rate retrieval and unsurpassed tracking performance.
REAR PANEL 1 3 2 1. AUDIO OUTPUT 2. DIGITAL OUTPUT 3. AC LINE CORD 10 11 1 2 1. POWER SWITCH AND POWER INDICATOR 2. OPEN/CLOSE 3. PLAY 4. PAUSE 5. STOP 3 4 5 6. PROGRAM 7. REPEAT 8. TIME 9. SEARCH 10. TRACK 11.
1. AUDIO OUTPUT Connect the left and right channel unbalanced (RCA) audio outputs to any input on your preamplifier or receiver except "Phono" or "Turntable". Highquality interconnection cables are recommended. 2. DIGITAL OUTPUT Co-axial cable digital output. 3. AC LINE CORD Plug the AC line cord into a switched outlet on your amplifier or into any AC wall outlet that provides the correct line voltage.
1. POWER SWITCH The CD player is turned on by depressing the power switch. The LED indicator above the power switch will glow green. Note: All connections must be completed before turning the power on. a) Use the TRACK button to select the first track in your planned sequence. In the memory mode, the CD8b has a "wraparound" function. If you TRACK back repeatedly from track "00", the number counts down from the final track of the disc.
h) To clear the program memory, press OPEN/CLOSE to open the drawer or simply switch off the power. 10. TRACK Press TRACK (< or >) to find a desired track. Track number is displayed. 7. REPEAT This button will allow two different types of endless play modes. Press the REPEAT button once, the word REPEAT 1 will appear on the display and the selected track will be repeated endlessly until the STOP button is pressed.
REMOTE CONTROL An infrared (IR) remote control is provided for convenient operation of the CD8b. The handset provides the same control functions as the front panel PLUS two additional control functions. NUMERIC KEYPAD (1-10, +10) Allows direct selection of desired track. Upon entry of the desired track number, the player shifts to the beginning of the track and begins to play. To select track 8, simply press the "8" button.
AUDIO OUTPUT (Ref. 1KHz/0dB, unless otherwise stated): Disc capacity.............................................................................Single disc, 120 or 80mm Programming capability.....................................................................................21 Tracks Digital to analogue convertion..............................Enhanced multilevel Delta-Sigma DAC Digital filter.....................................................
1. READ INSTRUCTIONS 16. DAMAGE REQUIRING SERVICE All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5.
PN: 21-4136
