GE Sensing & Inspection Technologies DPI 620 Series Advanced Modular Calibration and HART® Communication System Combines an advanced multi-function calibrator and HART communicator with world-class pressure measurement and generation. Now with ATEX /IEC approval.
Modularity brings a whole new perspective to multi-function test instruments, calibrators and HART communicators System features • Graphical views of data log files, calibration results and historical trends • Modular concept provides greater flexibility • PDA version with Windows CE – view loop diagrams, datasheets, safety procedures, spreadsheets and create text documents.
A flexible modular system The DPI 620 Series - Advanced Modular Calibration and HART Communication System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments.
The DPI 620 Series Advanced Modular Calibrator and HART Communicator Features • Measure, source and simulate multiple parameters • Complete HART communicator included • Easy-to-use, with photo quality colour touch screen, which can be operated by a gloved hand configured to show up to six reading windows and can show electrical and temperature inputs and outputs, two pressure module readings, an IDOS pressure measurement, and a USB-connected device, as well as a HART summary window or full HART communicato
High performance HART communicator The DPI 620 multifunction calibrator now incorporates a fully featured HART® communicator which surpasses market leading communicators in functionality, ease of use and upgrade support such that a single hand held device can now configure the full range of HART devices and perform mA trims and sensor calibrations without the need for secondary equipment such as ammeters, calibrators, power supplies and loop resistors.
The DPI 620 CE with WiFi* Advanced Modular Calibrator and HART Communicator A wireless IEEE 802.11g enabled Multifunction Electrical Calibrator and HART Communicator (*Not available with the IS version) The DPI 620 CE version can be further enhance with wireless IEEE 802.11g communications. For the first time, in a calibrator of this type, it is possible to link to the Internet and remote networks in order to access information and to transfer data.
Electrical Measurement and Source NLH&R ±1°C (2°F) for 24 hrs (note 1) %Rdg + %FS Measure mode DC Voltage Thermocouple TC mode -10 to 100 mV ± 200 mV ± 2000 mV ± 20 V ± 30 V AC Voltage1* 0 to 2000 mVAC 0 to 20 VAC 0 to 300 VAC Current ± 20 mA ± 55 mA Resistance RTD (True, 0 to 400 Ω 4 wire) 0 to 4000 Ω Resistance RTD (4 wire) 0 to 400 Ω 0 to 4000 Ω Frequency 0 to 1000 Hz 1 kHz to 5 kHz** 0 to 999999 CPM 0 to 999999 CPH Totalizing counter Trigger level Pressure 25 mbar to 1000 bar (0.
“True Ohms” RTD Measure Mode (4-wire) Type Temperature coefficient Pt 50 3.85 Pt 100 3.85 Pt 100 3.92 Pt 200 3.85 Pt 500 3.85 Pt 1000 3.85 Cu 10 4.27 D 100 6.18 Ni 100 6.72 Ni 120 6.72 Temperature range °C °F From To From To -200.00 0.00 -328.00 32.00 0.00 850.00 32.00 1562.00 -200.00 0.00 -328.00 32.00 0.00 850.00 32.00 1562.00 -200.00 0.00 -328.00 32.00 0.00 850.00 32.00 1562.00 -200.00 0.00 -328.00 32.00 0.00 260.00 32.00 500.00 260.00 850.00 500.00 1562.00 -200.00 -60.00 -328.00 -76.
RTD Simulate Mode (0.1mA min, 0-400Ω; 0.05mA min, 400-4000Ω) Type Temperature coefficient Pt 50 3.85 Pt 100 3.85 Pt 100 3.92 Pt 200 3.85 Pt 500 3.85 Pt 1000 3.85 Cu 10 4.27 D 100 6.18 Ni 100 6.72 Ni 120 6.72 10 Temperature range °C °F From To From To -200.00 0.00 -328.00 32.00 0.00 850.00 32.00 1562.00 -200.00 0.00 -328.00 32.00 0.00 850.00 32.00 1562.00 -200.00 0.00 -328.00 32.00 0.00 850.00 32.00 1562.00 -200.00 0.00 -328.00 32.00 0.00 260.00 32.00 500.00 260.00 850.00 500.00 1562.
Specifications relate to DPI 620 uncertainties only Measurement resolution 0.01 °C/F. Simulation resolution 0.1 °C/F Thermocouple Measurement and Simulation Type Standard Cold Junction (CJ) Error (maximum) Range: 10 to 30°C (50 to 86°F) = 0.2°C (0.4°F) Add 0.01°C (0.
PM 620 Pressure Modules Features MC 620 Module Carrier Features • 2 independent pressure channels • Simple to re-range • Fully interchangeable with no need for set-up or calibration • No tools or setup – just a simple screw fit • Simple screw fit - hand tight no tools required • Pressure protection • Ranges from 25 mbar to 1000 bar (10 inH2O to 15000 psi) • Accuracy from 0.
PM 620 Specification Maximum intermittent pressure Maximum working pressure Sealing PM 620 IS Pressure Module and Dummy Pressure Module Specification 2 x FS 110% FS IP 65 (protected against dust and jets of water) -10 to 50°C (14 to 122°F) -20 to 70°C (-4 to 158°F) 0 to 90% RH non condensing BS EN 61010:2001; Def stan 66-31, 8.4 cat III), 1 m Drop Tested BS EN 61326-1:2006 BS EN 61010:2001 Pressure equipment directive class SEP CE marked L. 56 mm, Dia.
The PV 621, 622 and 623 Pressure Stations Features • A uniquely capable, re-rangeable and self contained pressure test system • Advanced pressure generation - 95% vacuum to 20 bar (300 psi) pneumatic - 95% vacuum to 100 bar (1500 psi) pneumatic - 0 to 1000 bar (15000 psi) hydraulic • Stand alone replacements for hand pumps • Bench top use as comparators There are three pressure generation stations: the PV 621, a pneumatic pressure generator for pressures 95% vacuum to 20 bar (300 psi); the PV 622, a pneuma
Ordering Information Please order the following model numbers and part numbers as separate line items. Model DPI 620 Advanced modular calibrator Model DPI 620 CE Advanced modular calibrator with Windows CE The DPI 620/CE are supplied with a rechargeable lithium polymer battery P/N IO620-BATTERY, universal mains adaptor/charger P/N IO620-PSU, IO620-AC 300 VAC true rms measurement probe, test leads, calibration certificate, quick reference guide and CD with multilingual user manuals.
Carrying case (IO620-CASE-1-IS) USB cable (P/N IO620-USB-PC) 2 As IO620-CASE-1 but suitable for use in hazardous areas Connects the DPI 620 to a PC. System carrying case (P/N IO620-CASE-2) 1 IDOS to USB converter (P/N IO620-IDOS-USB) 1 A protective carrying case for system components including the DPI 620, MC 620, PM 620 modules, test leads, hose and adaptors. Allows connection of an IDOS universal pressure module to the DPI 620.
PV 621, 622, 623 and MC 620 Accessories Dirt moisture trap Prevents contamination of the PV 621 and 622 pneumatic systems and cross contamination from one device under test to another.
Pneumatic hose kit P/N IO620-HOSE-P1-IS As IO620-HOSE-P1 but suitable for use in hazardous areas P/N IO620-HOSE-P2-IS As IO620-HOSE-P2 but suitable for use in hazardous areas Hydraulic hose kit P/N IO620-HOSE-H1-IS As IO620-HOSE-H1 but suitable for use in hazardous areas P/N IO620-HOSE-H2-IS As IO620-HOSE-H2 but suitable for use in hazardous areas 1 Not suitable for use with the DPI 620 IS/IS CE. 2 Safe area use only.
© 2010 All Rights Reserved. Version control SDS 0003 issue 2 All specifications are subject to change for product improvement without notice. GE® is a registered trademark of General Electric Co. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE. www.gesensinginspection.com 2010 GE. All rights reserved.