Operating instructions

SUB 2 - active subwoofers for public address and home installations. Black coloured body with front
mounted 10” speaker. 200 W power amplifier, 20 Hz - 130 Hz frequency range. Low pass filter, volume
and phase control, ground lift switch. Built-in limiter. Line level stereo inputs. Simple device’s connecting
to the sound system.
What’s in the box?
Items those are included in the box:
• Active subwoofers SUB 2
• Instruction manual
• Power cable
Features
• 200 W power amplifier, 20 Hz - 130 Hz
frequency range.
• Low pass filter, volume and phase control,
ground lift switch.
• Built-in limiter.
• Line level stereo inputs and high pass
outputs.
• Stereo RCA and balanced 6.3 mm TRS
Jack and XLR inputs.
• Front mounted 10” speaker.
Hints on Installation
This user manual contains an important information on operating SUB 2 active subwoofer correctly and
safety. Please read it carefully before operating your subwoofer.
Before connecting audio signal, make sure that the power of all your system’s components
including the preamplifier or sound mixer is turned off. Also, make sure that all of inputs’ controls of your
active subwoofer are turned down
. This will avoid damage to your speakers and avoid unexpected noise.
Before disconnecting the SUB 2 active subwoofers always turn off the power switch.