Install guide

Connecting Drive Activity LED Indicators
www.3ware.com 17
Figure 11. 12-Port 3ware 9590SE-12ML Serial ATA RAID Controller
Figure 12. 16-Port 3ware 9590SE-16ML Serial ATA RAID Controller
Overall LED drive status indicator is the
right-most LED header pin pair on each
LED connector (J7, J8, and J3). The
anode is the lower of the two pins and
the cathode is the upper.
LED indicators for individual drives
J7 is for drives 0, 1, 2, 3 (left to right)
J8 is for drives 4, 5, 6, 7 (left to right)
J3 is for drives 8, 9, 10, 11 (left to right)
Overall LED drive status indicator is the
right-most LED header pin pair on each
LED connector (J7, J8, J9, J1). The anode
is the lower of the two pins and the
cathode is the upper.
LED indicators for individual drives
J7 is for drives 0, 1, 2, 3 (left to right)
J8 is for drives 4, 5, 6, 7 (left to right)
J3 is for drives 8, 9, 10, 11 (left to right)
J4 is for drives 12, 13, 14, 15 (left to right)