Owner Manual

COLONIAL PEDESTAL MAILBOX OWNERS MANUAL
&
ASSEMBLY INSTRUCTIONS
PARTS INVENTORY
TOOLS REQUIRED
Ratchet or
Adjustable Wrench
10 mm Bolt
Short Extension
Step 1.) Place Mailbox Post (Part # A) onto a soft
and clean surface. Loosely attach Support Piece
(Part # E) onto the Post, using 1 Bolt (Part # F) and
1 Flat Washer (Part # G). Repeat this step until
both sides are assembled.
Step 2.) Loosely attach the Mailbox (Part # B) to
the Post , using 1 Bolt (Part # F), with 1 Flat
Washer (Part # G). Repeat this step until both
sides are assembled.
ATTENTION: BEFORE ASSEMBLY, PLEASE MAKE SURE THAT ALL THE ABOVE PARTS ARE
INCLUDED AND YOU HAVE CAREFULLY READ THROUGH THE INSTRUCTIONS.
**NOTE: Aluminum is a soft metal, as over tightening may cause the metal to break. Loosely tighten all
hardware; when everything is assembled and balanced, proceed to tighten the bolts. **It is strongly
recommended that you get someone to help you set this mailbox up.**

Summary of content (2 pages)