Owner`s manual

CONTROL PANEL

Operation

Starting the unit

1. Insert the plug into the mains socket.

2. Press the “Power” button

Function

The “Function” key allows you to select Hi or Continuous or Low mode.

1). Hi

Fan on high speed

2). Continuous

Fan on high speed

The unit will run and perform continuous dehumidiﬁcation

3). Low

Fan with low speed

Switching off the unit

Press the “Power” button

The lights will turn off

The fan motor will continue running for 2 minutes to cool the heater

IMPORTANT

• After switching off the unit, wait at least 2 minutes before switching off the

power at the mains. This allows the heater to cool.

• Operate this unit on a ﬂat horizontal surface to avoid water leaks.

• Do not operate the unit without the AIR FILTER.

• When water tank is full, the alarm will beep 3 times. The tank full light will glow

and the unit will shut off until the tank is emptied and re-installed.

• The operational temperature range for this unit is 1-35 ºC.

• Water extraction will vary slightly at low temperature/humidity and the

operation mode.

• If the unit is tipped during operation, it will stop automatically and beep ten

times. After repositioning the unit upright, press the “Power” button to re-start

the dehumidiﬁer.