User's Manual

11
3 Connection & Installation
This section provides information about the connection and installation of the Amcrest WiFi Bullet network
camera.
3.1 Connection Guide
The camera initially should be connected via the following method:
In addition to connecting the camera to a computer, the camera should also be connected to a power source, by
connecting the included power cable to both a power outlet, and the camera.
3.2 Installation Guide
Follow the steps and use the diagram in this section to install the IP3M-943/IPM-723 Cameras.
Note: Prior to installation ensure that the installation environment can support at least 3 times the weight of the
camera.