Quick Start Guide

12
To choose a channel (or camera) for which to configure, click the number next to Channel, then
select either a single channel or All if you would like the schedule to apply to all channels currently
connected to your NVR. By default, the NVR will have the schedule for each recording type to
record 24/7. Also note, that the NVR uses military time from 00:00 to 24:00 hours instead of 12
a.m. to 12 a.m.
To edit a recording schedule, select a recording type from the colored boxes. Each recording type
is color coded: Green: Regular (24/7 recording), Yellow: Motion (Motion Detection), and Red:
Alarm. Select which recording type you would like to modify and then use your mouse to adjust
the time using the time bar for your specific recording type.
Note: The eraser icon to the right of any day if you would like to clear the entire row of blocks.
To add or remove motion detection blocks to the grid, mark the yellow checkbox next to Motion,
then click individual cells or click-and-drag for multiple blocks:
To the left of each day, there are small boxes which can be marked to ‘link’ days together. This is
useful if you want to save time by instantly making changes to multiple days simultaneously.
In the below example, Sunday and Monday are linked, so any blocks that are added or removed
for Sunday will automatically and immediately reflect the same for Monday and vice versa: