Quick Start Guide

14
In the Copy window, you can select individual channels for any cameras you have added to the
NVR or select All:
Click Save. When finished, click Apply to save your changes.
Setting Up Motion Alerts
This will allow video or snapshots of motion detection events to be recorded and retained in the
system. For more information on configuring motion detection, please refer to the information
below.
1. On the Main Menu, click on Alarm.
2. Select Video Detection to access the Motion Detection menu. This is the main configuration
page for your motion detection settings. Select which channel you are configuring from the
Channel drop down menu and click the Enable switch. This should be enabled motion detection.
Please note, this should be enabled by default, however if it is not, please ensure it is enabled.