Quick Start Guide

3
Welcome
Thank you for purchasing an Amcrest Wi-Fi NVR.
This document provides a brief overview of your Amcrest Wi-Fi NVR, setup, and its features. For
access to a full user manual or further information regarding your device please visit:
http://amcrest.com/support
Important Safeguards and Warnings
All installation and operation of the device should conform to your local electrical safety codes.
We assume no liability or responsibility for any of the fires or electrical shocks caused by improper
handling or installation.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
Do not submerge the device in water or install in areas with high levels of moisture or humidity.
Handle with care, avoid from dropping or placing the device in unsecure areas.
The NVR does not have rack mount compatibility and should be used on flat surfaces.
Check Packaging
When you receive the NVR, unpack it, and check all sides of the NVR to see if there is any physical
damage. The protective materials used for the packaging of the NVR will protect most accidental
damage during transportation, but to ensure that your equipment is operating as expected, it is
recommended to inspect the product before proceeding.
On the NVR, check that the label on the bottom is not damaged. The serial number and model
number of the unit is needed to add the device to other Amcrest applications.
Front Panel
Applicable for A3 Series Wi-Fi NVRs