Quick Start Guide

4
Icon
Name
Function
NET
Network Abnormality
When a network error occurs or there is no network
connection, this light turns red.
PWR
Power indicator
When the NVR is on, this light remains on.
HDD
HDD abnormal
indicator light
When an HDD error occurs, or the HDD capacity is below the
specified threshold value, this light turns red.
Rear Panel
Applicable for A3 Series Wi-Fi NVRs
USB 2.0 port
USB 2.0 port. Connect a mouse, USB storage device, etc.
Network port
10M/100Mbps self-adaptive Ethernet port.
HDMI
HDMI Output
High-definition audio and video signal output port.
VGA
VGA video output
port
VGA video output port. Outputs analog video signal. This
connects to the monitor to view analog video.
GND
Ground end
Power Port
DC12V, 1.5A
MIC IN
Audio input port
This is used to receive the analog audio signal from a mono
RCA microphone.
MIC Out
Audio output port
 This is used to receive the analog audio signal from a mono
RCA speaker.
Hardware Setup
Before setting up the NVR, you will need the following items. These items may not be included:
A computer monitor or TV with either an HDMI or VGA input