Quick Start Guide

Enter Password

Create a new admin password for your NVR. The password for your device should be between 8

and 32 characters. A combination of letters, numbers, and symbols are recommended when

setting up your password.

Note: Please do not use special symbols like ‘ ‘ ; : &

Once you have entered a new password for your device, confirm the password in the next field. A

hint for the password is optional but is recommended in case you forget the password. Click Next.

Unlock Pattern

To set an unlock pattern, use your mouse to draw a design that you will remember. Draw the

pattern again to confirm. Please note, this is optional, if you do not want to set an unlock patter,

click Skip to proceed.