User's Manual

4
1. Press the menu button on the monitor unit to display the main menu
on the screen (touch panel). See Fig. 7.
2. There are two main menus. See Fig. 8.
(1) Brightness Setting
(2) Volume Setting
(3) Camera Selection
(4) Night Light Setting
(5) VOX Function
(6) Next Page
(7) Delete Camera
(8) Add Camera
(9) Flip Function
(10) Last Page
(11) Display Frequency and White Balance Setting
(12) Restore Default
Brightness Setting ( Brightness )
In this submenu you can adjust brightness of the screen. See Fig. 9.
Volume Setting
In this submenu you can adjust volume level on monitor side. See Fig. 10.
Camera Selection ( Camera Select )
In this submenu you can select which camera that you want to display on the
screen. See Fig. 11.
Night Light Setting
1. When you enable the auto mode , the icon will light up. You can
choose the sensitivity level. With the level set to high, the light will detect
higher light. See Fig. 12.
2. When the light from the camera reaches the set level, the night light will
turn on as setting.
3. When you enable the manual mode , you can turn ON/OFF the night
light as setting.
4. Press the icon , you can change the color of night light. There are
three colors of night light (yellow, green, orange).
5. Press the icon , you can change the level of brightness. There are four
levels of brightness.
Menu Options
3
3.1
3.2
3.4
3.3