User Guide

6. Scan the QR code. The QR

code can be found on the serial

tag along with the scannable

barcode.

7. Create a name for the device

and enter a username and

password. The default

username and password will be

admin. Tap “Start Live View”.

8. Update the default password

for the device and tap “Start

Live View” to access the device

in the app.

Note: To locate the serial number, you must either have physical access to the NVR or computer

access to the web interface to access the P2P menu. The SN QR code will be the serial number

for your device. For more information regarding the Amcrest View Pro app, please visit:

https://amcrest.com/support

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

2. The user’s manual or instruction manual for an intentional or unintentional radiator shall

caution the user that changes, or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment. In cases where the

manual is provided only in a form other than paper, such as on a computer disk or over the

Internet, the information required by this section may be included in the manual in that alternative

form, provided the user can reasonably be expected to have the capability to access information

in that form.

3. (b) For a Class B digital device or peripheral, the instructions furnished the user shall

include the following or similar statement, placed in a prominent location in the text of the

manual: NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.