User Guide

42
Before performing this setup process, it is recommended that you are familiar with or have
completed the steps in both part 3 ‘Console Setup and part 5 of this guide: Computer Access
Setup > Setting up DVR Local Access.
Below is a step-by-step walkthrough that details how to setup the DVR for remote web access
using UPnP and DDNS:
1. Log in to your DVR’s built-in (console) interface, open the Main Menu (by left-clicking once, or
right-clicking and choosing MAIN MENU from the dropdown, then click NETWORK from the
management section of the menu:
2. From the left-hand navigation panel, click CONNECTION, then locate the HTTP port on the right.
It is recommended to ensure the port number is at least 5 digits long to prevent any port conflicts.
You can change the port to any 5-digit number that is less than 65535 (e.g. 12345) by clicking
the number field and entering a new port number. Write it down, then click Apply.
3. The system will need to reboot for this change to take effect. Click OK.