User Guide

43
4. Once rebooted, login to your DVR again, open the MAIN MENU, then click NETWORK from the
management section of the menu again.
5. Click CONNECTION from the left navigation panel again and ensure that the HTTP port has
changed.
6. Next, click DDNS from the left navigation panel, and make sure the toggle switch for Enable is
toggled to the on position.
7. Create and write down the domain name for your device in the Domain Name field. Then, click
Apply.
8. Click UPnP from the left navigation panel and select the PAT radio button at the top to the on
position. Then, locate row 1 in the PAT Table, where HTTP is written beneath Service Name
Protocol, and click the edit icon to change the HTTP Ext. Port.