Manualshelf

User Guide

ManualsBrandsAmcrest ManualsElectronicsNV2104-HS 4CH NVR 4K/6MP/5MP/4MP/3MP/1080P Network Video Recorder, 4-Channels, No PoE Ports, Supports 4 x 4K IP Cameras, HDD Not Included (Supports up to 6TB Hard Drive) (No Built-in WiFi)
21222324252627282930
23
3. Click on Apply to save the settings to your device.
Setting Up Recording Schedules
1. From the Main Menu, click on STORAGE in the MANAGEMENT section:
Make sure you are on the SCHEDULE > REC page. This is where you can configure your video
recording schedules. To configure a snapshot schedule, click on the Snapshot tab. All video
events will be saved and accessible via the playback menu, if a hard drive is installed, whereas
snapshot events can be emailed. For more information on how to setup Email snapshots, please
refer to section, “Setting Up Email Alerts”. By default, Regular (24/7), MD (Motion Detection)
recording types will be activated for all days as indicated by the different colored bars available in
this menu.
To choose a channel (or camera) for which to configure, click the number next to Channel, then
select either a single channel or All if you would like the schedule to apply to all channels
currently connected to your NVR:
By default, the NVR will have the schedule for each recording type to record 24/7. Also note, that
the NVR uses military time from 00:00 to 24:00 hours instead of 12 a.m. to 12 a.m.