User Guide

26
over to other days by checking them individually or checking All. Make sure to click Save when
finished.
Now that you have finished configuring the recording schedules, you may need to copy these
settings over to other channels (or cameras). By default, D1 (Channel 1) will be selected unless
you immediately selected All in the channel window previously. Please note, you can copy these
settings directly over to another channel by clicking Copy.
In the Copy window, you can select individual channels for any cameras you have added to the
NVR or select All:
Click Save when finished.
When finished on this screen, click Apply to save your changes.
Setting Up Email Alerts
Setting up Email alerts will allow you to receive snapshots of motion events via your email. Each
event type must have the “Send Email” option enabled to allow the feature to send snapshots to
your email. To setup email alerts, please refer to the information provided below.
1. On the Main Menu, click on Network located in the Management section.