User Manual

11
Right click
mouse
In real-time monitor mode, pops up shortcut menu: one-window, four-window, nine
window and sixteen-window, Pan/Tilt/Zoom, color setting, search, record, alarm input,
alarm output, main menu.
Among which Pan/Tilt/Zoom and color setting applies for current selected channel. If you
are in multiple-window mode, system automatically switches to the corresponding
channel.
Exit current menu without saving the modification.
Press middle
button
In numeral input box: Increase or decrease numeral value.
Switch the items in the check box.
Page up or page down
Move mouse
Select current control or move control
Drag mouse
Select motion detection zone
Select privacy mask zone.
3. Connection and Installation
3.1 Check Hardware
When you receive the DVR system in the packaging, unpack it, and check all sides of the DVR to see if there is any
physical damage. The protective materials used for the packaging of the DVR can protect most accidental damage
during transportation, but to ensure that your equipment is operating as expected, it is recommended to inspect
the product before proceeding further.
On the DVR unit, check specifically that the label on the bottom of the DVR is not damaged. The serial number of
the unit is usually needed to provide support.
Please check that all required items for your DVR are present and accounted for. To check what is included with
your purchase, go to http://amcrest.com/-security-camera-systems.html/ and find the product you purchased,
then scroll down and click the “What’s Included” tab. If any item is missing, please contact us as soon as possible
so we can send you the missing component.
3.2 Hard Drive Installation
You can refer to the Appendix for recommended HDD brands and models. Please use an HDD of 7200rpm or
higher. Please follow the instructions below to install a hard disk drive (HDD).
All the figures listed below are for reference only. Slight differences may be found on the front or rear panel.