User Guide

To begin, press the Sync button on the
front of the smart hub. Once pressed, an
indicator LED on the hub will begin to
flash.
Pairing Cameras
Press the Sync button on the back of
the camera. A green indicator light on
the front of the camera will begin to
flash indicating the camera is pairing
to the smart hub.
Once the LED lights on the smart hub
and camera have both disappeared,
the camera has been successfully
paired.
Tap “Next” in the app to continue.
The camera has now been successfully
paired to the smart hub. If you would
like to add addtional cameras, tap on
“Add another camera” and repeat the
pairing process.
If you are done pairing cameras, tap on
“Finish”.
Pairing Is Complete!
Note: If you are pairing additional cameras, tap on “Add another
camera” and repeat the pairing cameras process previously described.