User Guide

I’m Having Trouble Completing the In-app Setup.
If the setup fails in the Amcrest Smart Home app, the light on the front of
the doorbell will indicate the following issues:
A solid LED indicates that the Wi-Fi doorbell is properly
connected to the Wi-Fi network. If the light on the front is solid
no further action needs to be taken and the doorbell is properly
added into the app.
A spinning LED indicates the Wi-Fi doorbell is in setup mode
and is currently not connected to a network. Please follow the
installation instructions in the Amcrest Smart Home app to
continue.
If there is no LED on the front of the doorbell check that the
terminals on the back of your doorbell and make sure they are
properly connected to the wires and that your doorbell system
meets the necessary power requirements (16 volts AC at 30
VA).
For more information, see “The Doorbell Is Installed But It Will
Not Turn On.” in this section.
The Internal Chime
Is Not Ringing Correctly.
1
2
3
In the Amcrest Smart Home app, select your Wi-Fi doorbell
to access the live view menu.
Tap on the gear wheel icon ( ) to enter the settings for
your doorbell.
Tap on Link Chime to access the chime menu and select
which chime you would like to use.
Solid
Spinning
Nothing
NOTE If you have selected the right doorbell type and the chime is still not
working correctly, please make sure that you have installed the included chime kit.