User Guide

ManualsBrandsAmcrest ManualsCamera & Photo1080P Video Doorbell Camera Pro, Outdoor Smart Home 2.4GHz WiFi Doorbell Camera (Wired Power), MicroSD Card, PIR Motion Detect, RTSP, IP55 Weatherproof, 2-Way Audio, 140º Wide-Angle AD110

1

2

3

4

5

6

7

8

9

3

B Use the included Philips

head screwdriver to remove

the bracket screw from the

doorbell.

A Place your ﬁngers in the

indentations on the sides of

the doorbell, simultaneously

pull away and push the

faceplate out.

Remove the Faceplate and Bracket

B Place the doorbell bracket to ﬁt your existing

doorbell wiring. Then mark the drill holes with a

marker.

C

For Wood, Drywall or Soft Surfaces: Secure the

doorbell bracket to the mounting surface using the

included screwdriver and mounting screws.

For Concrete, Stucco or Brick: Using your previ-

ously marked holes as a guide, drill holes into the

mounting surface using a 15/64 masonry drill bit.

Then, insert wall anchors and secure the mounting

brackets using the included mounting screws.

A Remove your existing doorbell from the wall

and disconnect the wires. These are the wires

we will be using to install your new Amcrest

Wi-Fi Doorbell.

Installing the Mounting Bracket