User Manual

Using the included screwdriver, loosen the screws labeled

“FRONT” & “TRANS”.

Note: Be careful not to detach or remove the existing

wiring.

Connecting the Chime Kit

Slide the connecting wires from the Amcrest

Chime Kit underneath the screws, then retight-

en the screws. It doesn’t mattery which wires

connect to which terminal.

Locate and Loosen the Screws on your Chime

Replace the Chime Cover

Secure the Amcrest Chime Kit using the

included adhesive. If you are using a

mechanical chime, ensure any excess

wiring is clear of all moving parts.