User Manual

Delete Device

The delete device option allows you to unbound and remove the device from your Amcrest

Smarthome account. This option is useful if performing a factory reset on the device or setting up

the device in a new location.

To access the Delete Device option for your device, tap on the

settings icon ( ) on the live view screen.

Scroll down to the bottom of the settings menu and tap on the

Delete Device option. A prompt will appear asking if you are sure

you would like to delete the device. If any cloud recordings are

present on your accont for this device you can choose to keep

the recordings stored or remove them once the device is deleted.

By default, cloud recordings will be stored after the device is

deleted however, you can uncheck this option to delete cloud

recordings for this device.

Tap on Delete to delete the device from your account.

How to Perform a Factory Reset

Performing a factory reset on your doorbell will reset the device back to its original default settings. It

is highly recommended to delete your device from your Amcrest Smart Home account before perform-

ing a factory reset. For more information on how to factory reset your device, please refer to the infor-

mation provided below.

• To begin, Remove the front face plate and the protective face plate of the doorbell and locate the

reset/conﬁg button on the side of the device.

Reset/Conﬁg Button

• Press and hold the reset button until the device prompts you that it is hard resetting.

• Let go of the reset button. The LED indicator on the front of the doorbell will begin to ﬂash blue.

Allow the device to reset for roughly 1 - 2 minutes,

Your doorbell has now been successfully reset to its original factory settings. The admin username

and password for the doorbell has been reset to admin.